Casio 3193, 3200, MO0908-EA Tide/Moon Data, World Time, Moon Data, Adjusting the High Tide Time, Signal Reception Troubleshooting, Reversing the Displayed Moon Phase, Tide Data

Operation Guide 3193 3200

Receive failed

If there was a previously successful receptionIf no reception was successful

•If the latest reception fails but a previous reception wassuccessful, an indicator ( ) will be on the display.

•The watch will return to normal timekeeping without changing the time setting if you press Dor if you do not perform any button operation for about one or two minutes.

Note

•To interrupt a receive operation and return to normal timekeeping, press D.

Moon Data

The Moon phase and Moon age information that appears first when you enter the Tide/Moon Data Mode shows the data at noon for your currently selected Home City on the current date, according to the Timekeeping Mode. After that you can specify another date to view data.

•If the Moon data is not correct, check your Timekeeping Mode settings and correct them if necessary.

•If the Moon phase indicator shows a phase that is a mirror image of the actual moon phase in your area, you can use the procedure under “Reversing the Displayed Moon Phase” to change it.

Tide/Moon Data Screens

In the Tide/Moon Data Mode, press Ato toggle between the tide data screen and the Moon data screen.

Tide Data Screen		Moon Data Screen
Current tide range	Month – Day	Moon phase	Month – Day

To turn auto receive on and off

	lll						1. In the Timekeeping Mode, press Dto display the last
							successful receive time and date screen.
ll		l
l		l
l		l					2. Hold down Auntil the current auto receive setting (ON
l l
		ll
			l ll		ll		or OFF) starts to flash. This is the setting screen.
		l					• Note that the setting screen will not appear if the
		l				l
		ll				l
		l				l	currently selected Home City is one that does not
		l				l
						l
		l	ll		l		support time calibration reception.
				l l
							3. Press Dto toggle auto receive on (ON) and off
		On/Off status					(OFF).
							4. Press Ato exit the setting screen.

•For information about city codes that support signal receive, see “To specify your Home City” .

To check the latest signal reception results

Press D to view the last successful receive time and date. Press Dagain to return to the previous screen.

lll				Press A.
ll	l		▲	▲
		l
l		l
ll
Time			Current	Moon age

tide level

•When you display the Tide Data Screen, it initially shows tide data for 6:00 a.m..

•Use the Tide Data Screen to specify the Tide Data time. You can use D (+) and B(–) to change the displayed time in one-hour increments.

•Use the Moon Data Screen to specify the Tide/Moon Data date. You can use D (+) and B(–) to change the displayed date in one-day increments. Pressing Dand B will display the year of the displayed date.

Adjusting the High Tide Time

Use the following procedure to adjust the high tide time within a particular date. You can find out high tide information for your area from a tide table, the Internet, or your local newspaper.

To adjust the high tide time

Signal Reception Troubleshooting

Check the following points whenever you experience problems with signal reception.

Problem	Probable Cause	What you should do
Cannot perform • The watch is not in the		• Enter the Timekeeping Mode
manual receive.	Timekeeping Mode.	and try again.
	• Your current Home City is not one	• Select LIS, LON, MAD, PAR,
	of the following: LIS, LON, MAD,	ROM, BER, STO, ATH,
	PAR, ROM, BER, STO, ATH,	MOW, HKG, BJS, TPE, SEL,
	MOW, HKG, BJS, TPE, SEL,	TYO, HNL, ANC,YVR, LAX,
	TYO, HNL, ANC,YVR, LAX, YEA, YEA, DEN, MEX, CHI, NYC,
	DEN, MEX, CHI, NYC, YHZ, or	YHZ, or YYT as your Home
	YYT	City.
Auto receive is • You changed the time setting		• Perform manual signal

		lll
	l			l
	l			l
	l				l
	l				l
l	l	l		l
			ll
l			l
l			l
l
l			l
l			l
l			l
	ll
Hour
		lll
	l			l
	l			l		l l
	l				l
	l				l		ll
		l		l
			ll				l
			l				l
		l						l
		l
		l						l
		l					ll	l
			l
				l	l l l		l

1.In the Tide/Moon Data Mode, hold down Auntil the hour digits start to flash.2.Use D (+) and B (–) to change the hour setting.3.When the hour is the setting you want, press C.• This will cause the minute digits to flash.4.Use D (+) and B(–) to change the minute setting.5.When the minute setting is the way you want, press Ato exit the adjustment screen and return to the Tide/ Moon Data Mode screen.

•Pressing D and B at the same time while the time adjustment screen is displayed (steps 2 through 5 above) will return the high tide time to its initial factory default setting.

•The high tide time setting is not affected by the DST (summer time) setting of the Timekeeping Mode.

turned on, but	manually.	receive or wait until the next
the Settings	• The DST setting was changed	auto signal receive operation
updated	manually in the World Time Mode.	is performed.
indicator does	• You pressed a button while signal	• Check to make sure the
not appear on	receive was in progress.	watch is in a location where
the display.	• Even if receive is successful, the	it can receive the signal.
	Settings updated indicator will
	disappear from the display each
	day when the first auto receive
	operation of the day is performed.
	• Time data (hour, minutes,
	seconds) only was received
	during the last receive operation.
	The Settings updated indicator
	appears only when time data and
	date data (year, month, day) are
	both received.
Time setting	• If the time is one hour off, the	• Change the DST setting to
is incorrect	DST setting may be incorrect.	Auto DST.
following	• The Home City code setting is	• Select the correct Home City
signal	not correct for the area where	code.
reception.	you are using the watch.

•For further information, see “Important!” under “Time Calibration Signal Reception” and “Radio-controlled Atomic Timekeeping Precautions”.

Tide/Moon Data

In the Tide/Moon Data Mode, you can see the current tide and the current date’s Moon phase for your Home City. You can specify a date and view tide and Moon data for that date.

Minute

•On some days, there are two high tides. With this watch, you can adjust the first high tide time only. The second high tide time for that day is adjusted automatically based on the first high tide time.

Reversing the Displayed Moon Phase

The left-right (east-west) appearance of the Moon depends on whether the Moon is north of you (northerly view) or south of you (southerly view) as you view it.

You can use the procedure below to reverse the displayed Moon phase so it matches the actual appearance of the Moon where you are located.

•To determine the viewing direction of the Moon, use a compass to take a direction reading of the Moon at its meridian passage.

•For information about the Moon phase indicator, see “Moon Phase Indicator”.

To reverse the displayed Moon phase

		llll			1. In the Tide/Moon Data Mode, hold down Auntil the
					hour digits start to flash.
	l			l
l ll		l		l
		l			2. Press Ctwice.
	l		ll
l
l	l
l		l			• This will cause the Moon phase indicator to flash. This
l
llll		l
					is the indicator switching screen.
					3. Press Dto toggle the Moon phase indicator between
					the southerly view (indicated by	) and northerly

view (indicated by ).•Northerly view: Moon is north of you.•Southerly view: Moon is south of you.

4.When the Moon phase indicator setting is the way you want, press A to exit the switching screen and return to the Tide/Moon Data Mode screen.

World Time

•See “Moon Phase Indicator” for information about the Moon phase indicator and “Tide Graph” for information about the tide graph.

•All of the operations in this section are performed in the Tide/Moon Data Mode.

Note

•It takes about two seconds to calculate tide graph data. You will not be able to display a setting screen while data calculation is in progress.

•Moon age is calculated to an accuracy of ±1 day.

Tide Data

The Tide Graph that appears first when you enter the Tide/Moon Data Mode shows the data at 6:00 a.m. for your currently selected Home City on the current date, according to the Timekeeping Mode. From there you can specify another date or time.

• If the tide data is not correct, check your Timekeeping Mode settings and correct

them if necessary.

• If you feel that the information shown by the Tide Graph is different from actual tide

City code

Current time in selected city

World Time shows the current time in 48 cities (31 time zones) around the world.

•The times kept in the World Time Mode are synchronized with the time being kept in the Timekeeping Mode. If you feel that there is an error in any World Time Mode time, check to make sure you have the correct city selected as your Home City. Also check to make sure that the current time as shown in the Timekeeping Mode is correct.

•Select a city code in the World Time Mode to display the current time in any particular time zone around the globe. See the “City Code Table” for information about the UTC differential settings that are supported.

•All of the operations in this section are performed in the World Time Mode, which you enter by pressing C.

conditions, you need to adjust the high tide time. See “Adjusting the High Tide Time”

for more information.

To view the time in another city

While in the World Time Mode, use the D(eastward) and B (westward) to scroll through the city codes (time zones).

•Pressing the Dand Bat the same time will jump to the UTC time zone.

3