Playing with Different Tones

4 While holding down the CONTROL button, use the keyboard keys shown below to input the tone number of the GM tone you want to assign to the GM TONES button.

Example: 008 (GM CELESTA)

Selecting the GM TONES Button Variation Tone

To assign a variation tone to the GM TONES button, perform the steps under “Selecting a GM Tone or Drum Set” on page E-7. After step 1, however, press the VARIATION button so the indicator lamp above it is lit.

After you assign a GM tone as the variation tone, you can select it by pressing the GM TONES button while the indicator lamp above the VARIATION button is lit.

Using Tone Effects

Reverb: Makes your notes resonate

Chorus: Adds more breadth to your notes

1 4 6 9

0 2 3 5 7 8

1 Press the REVERB CHORUS button to cycle through the effect settings as shown below.

•You can find out the current reverb/chorus configuration by looking at the REVERB and CHORUS indicator lamps.

▲

▲

▲

▲

▲

▲

▲

▲

C1

C2

C3

C4

C5

C6

C7

C8

•Be sure to input all three digits.

•This displays the number of the assigned tone.

5 After inputting the tone number you want, release the CONTROL button to exit the GM tone setting screen.

On

Off

On

On

Both on

Both off

Reverb on

Chorus on

NOTE

•You can also select a tone by holding down the GM

TONES button as you use the GM SELECT [ ] and [ ] buttons to scroll through tone numbers on the display.

•The tone that you assign to the GM TONES button is retained until you turn off the keyboard.

•If a drum set is assigned to the GM TONES button, keyboard keys sound drum sounds when you press them. See page A-3 for information about the drum sounds that are assigned to each of the keyboard keys.

E-8

413A-E-010C