Power Supply

Getting Acquainted

 

 

 

Auto Power Off

Using AC Power

Power automatically turns off whenever you do not perform any cam-

To power the camera from standard AC power, use the optional AC

era operation for a period of time. Power turns off after about two

adaptor (AD-C60).

minutes in the Record Mode or after about five minutes in the Play-

 

back Mode.

AC power terminal

 

• To restore power, simply slide the POWER switch to the right as

AC adaptor

you normally do.

 

 

 

 

AC outlet

AC Adaptor precautions

 

 

 

 

 

 

 

 

 

 

 

Important!

 

• Never use an electrical outlet whose

 

voltage is outside the rating marked

The Auto Power Off function does not operate under the following

 

 

on the camera. Doing so can create

conditions.

 

the danger of fire or electrical shock.

•

During Auto Play (page 43)

 

Use only the optional AC adaptor

•

When operations are being performed on a computer connected to

Caution

specified for this camera.

• Should the cord of the AC adaptor

 

the camera via the camera’s DIGITAL terminal.

 

 

 

 

 

become damaged (exposed internal

 

 

 

 

wiring or shorts), request a replace-

 

 

 

 

ment from an authorized CASIO ser-

 

 

 

 

vice provider. A damaged AC adap-

 

 

 

 

tor cord creates the danger of fire or

 

 

 

 

electrical shock.

 

 

 

 

1718

 

 

 

Power Supply

 

 

OperationRecording Images

 

 

 

 

 

 

 

 

 

 

 

 

 

•

Always be sure to use the AD-C60

The following procedure provides the basic steps for recording an

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AC adaptor only. Using any other AC

image.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

adaptor can cause damage to the

To record an image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

camera not covered by the warranty.

 

 

 

 

 

 

 

 

 

 

 

 

Caution

•

When unplugging the AC adaptor

1.

Enter the Record Mode.

 

 

 

REC

 

 

 

 

 

 

from the wall socket, be sure to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

grasp the adaptor (not the cord).

 

 

• Slide the function switch to the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

Avoid an undue bending, pulling,

 

 

REC position.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

 

 

 

 

PLAY

 

 

 

and twisting of the AC adaptor's
Turn on the camera.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cord, and never try to lengthen the

 

 

• Slide the POWER switch in the di-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cord by splicing it with other wire.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rection indicated by the arrow.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

Be sure to switch power off before connecting or disconnecting the

 

 

• The POWER switch automatically

 

 

 

 

 

 

 

 

 

 

 

 

 

slides back to its original position

 

 

 

 

 

 

 

 

 

 

 

 

adaptor.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

when you release it.

 

 

 

 

 

 

 

 

 

 

 

•

Always turn camera power off before disconnecting the AC adaptor,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• When power comes on, the image of the object that is in

 

 

 

 

 

 

 

 

 

 

 

 

even if the camera has batteries installed. If you don't, the camera

 

 

 

 

 

 

 

 

 

 

 

 

 

 

will turn off automatically when you disconnect the AC adaptor.

 

 

front of the camera’s lens appears on the LCD.

 

 

 

 

 

 

 

 

 

 

 

 

Even so, you run the risk of damaging the camera whenever you

 

 

• You can perform steps 1 and 2 in either order (1 then 2, or 2

 

 

 

 

 

 

 

 

 

 

 

 

disconnect the AC adaptor without first turning power off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

then 1).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

The AC adaptor may become warm to the touch after extended pe-

3.

Set the NORMAL/MACRO switch to the NORMAL position.

 

 

 

 

 

 

 

 

 

 

 

 

riods of use. This is normal and is not cause for alarm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• For close-ups, set the NORMAL/

 

 

 

 

 

 

 

 

 

 

 

•

After use turn off the power switch of the camera and unplug adap-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MACRO switch to MACRO. See

 

 

 

 

 

 

 

 

 

 

 

 

tor from the AC outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

page 25 for details on using this

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

switch.

MACRO

 

NORMAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The camera is designed to refresh the image on the LCD about

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

seven times per second. Because of this, you may experience a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

feeling of jerkiness in the changing image if you move the camera

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

quickly. This is normal and does not indicate malfunction.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19

20