Casio QV-R41, R51 Specifying an Image for the Startup Screen, Turning the Key Tone On and Off, OTHER SETTINGS, then press [], then press [], then press [SET], then press [SET]

OTHER SETTINGS

Turning the Key Tone On and Off

Specifying an Image for the Startup Screen

Use the following procedure to turn the tone that sounds			You can specify an image you recorded as the startup
when you press a key on and off.			screen image, which causes it to appear on the monitor
			screen for about two seconds whenever you press the
1. In the REC mode or the PLAY mode, press			power button or [ ] (REC) to turn on the camera. The
			startup screen image does not appear if you press [ ]
	[MENU].
			(PLAY) to turn on the camera.
2. Select the “Set Up” tab, select “Beep”, and			1. In the REC mode or the PLAY mode, press
	then press [].
			[MENU].
3.Use [] and][ to change the setting, and
	then press [SET].		2. Select the “Set Up” tab, select “Startup”, and
			then press [].
	To do this:	Select this setting:	3.Use [] and][ to display the image yo
	Turn on the key tone	On
			to use as the startup image.
	Turn off the key tone	Off
				• You can specify a snapshot image or a movie image
				that is two seconds (200KB) or less in length.
			4. Use [ ] and][ to change the setting,
			then press [SET].
				To do this:	Select this setting:
				Use the currently displayed image	On
				as the startup screen image
				Disable the startup screen	Off

124