ASSEMBLY STEP 1

Fasten the Rail to the Motor Unit

MODELS 1356 AND 1346 ONLY

ïRemove the two washered bolts mounted in top of motor unit.

ïAlign rail and styrofoam over sprocket.

ïCut tape from rail, chain and styrofoam. Remove styrofoam and pull the chain back (away from the mounting plate).

ïFasten the rail with the two washered bolts previously removed. Tighten securely.

Use only these bolts! Use of any other bolts will cause serious damage to door opener.

CAUTION

To avoid SERIOUS damage to garage door opener, use ONLY those bolts/fasteners mounted in the top of the opener.

Styrofoam

Packaging

Chain

 

Rail

USE ONLY THIS

Washered

Bolts

TYPE AND SIZE

5/16"-18x1/2"

BOLT

Motor

Unit

Sprocket

 

Washered Bolts

 

5/16"-18x1/2"

USE ONLY THIS

Mounting

Plate

TYPE AND SIZE

 

BOLT

 

Styrofoam

Packaging

9