FEATURES OF YOUR OPENER

1.Opener Lights: Turn on and off automatically with 4-1/2 minute illumination for your safety and convenience. Provide constant LIGHT when Light Switch is ON.

2.Safety System: Independent up and down force adjustment. The door REVERSES automatically when obstructed in DOWN direction. The door STOPS when obstructed in UP direction.

3.Emergency Disconnect: Pull cord disconnect permits manual door operation.

4.Automatic Reconnect: Trolley halves reconnect for automatic operation when opener is energized after emergency disconnect.

5.Motor Power: Permanently lubricated motor with automatic reset.

6.Digital Radio Controls: Codes can be easily changed by the owner.

7.Easy Limit Adjustment: Limits of door opening and closing adjusted by turning screws without removing chassis cover.

8.Lock Switch: Prevents operation of opener from transmitter. When LOCK Switch is ON, the opener can be operated in the UP direction ONLY, from the Wall Control or optional Key Switch and Keyless Entry accessories, (See below).

SPECIFICATIONS

 

MOTOR

Type ........................................

Permanent split capacitor

Speed......................................

1500 rpm

Volts........................................

120 Volts AC - 60 Hz. Only

Current....................................

4.5 amperes

 

DRIVE MECHANISM

Gears ......................................

16:1 worm gear reduction

Drive........................................

Roller chain with two-piece trolley on

 

steel Tee-rail.

Length of travel........................

Adjustable to 7 1/2 feet

Travel rate ..............................

6 to 8 inches per second

Lamp .......................................

On when door starts to travel, off 4 1/2

 

minutes after stop. Also separate

 

LIGHT Switch.

Door linkage ............................

Adjustable door arm. Pull cord

 

trolley release.

 

SAFETY

Personal..................................

Push button and automatic reversal in

 

down direction. Push button and

 

Automatic stop in UP direction.

Electronic................................

Independent UP and DOWN force

 

adjustment screws.

Electrical .................................

Motor overload protector & low voltage

 

push button wiring.

Limit device.............................

Circuit actuated by limit nut

Limit Adjustment .....................

Screwdriver adjustment on side panel

Start circuit .............................

Low voltage push button or radio

 

control.

 

DIMENSIONS

Length (overall) .......................

128 inches

Headroom required .................

2 inches

Hanging weight .......................

32 pounds

4