Chamberlain 4620, 4620-2 950CB, 953CB, 945CB, 935CB, 940CB, 956CB, 7702CB, 7706CB, 41A5281, SECURITY, Remote Control:, Remote Control:, Extension Brackets:, Mini Remote Control:

Accessories Available For Your Opener

950CB953CB945CB

LOCK

LIGHT

935CB

LOCK

LIGHT

940CB

SECURITY✚ Single-Function	956CB	SECURITY✚ Multi-Function
Remote Control:		Mini Remote Control:
Includes visor clip.		With key ring and Velcro fastening
		strip.
SECURITY✚ Multi-Function	7702CB	Outside Quick Release:
Remote Control:		Required for a garage with NO
Includes visor clip.		access door. Enables homeowner to
		open garage door manually from
		outside by disengaging trolley.
Multi-Function Door Control Panel:	7706CB	8 foot Rail Extension Kit:
Provides a Lock Feature which		To allow an 8 foot door to open
prevents operation of garage door		fully.
opener from portable remotes and a
Light Feature for constant light.
Motion Detecting Control Panel:	41A5281	Extension Brackets:
Multi-function door control with		(Optional) For safety sensor
motion sensor that automatically		installation onto the wall or floor.
turns opener lights on for 5 minutes		To order call: 1-800-528-9131
when it detects a person entering the
garage. Sensor can be easily
deactivated when desired.

SECURITY✚ Keyless Entry:

Enables homeowner to operate garage door opener from outside by entering a password on a specially designed keyboard. Also can add a temporary password for visitors or service persons. This temporary password can be limited to a programmable number of hours or entries.

To Add the Keyless Entry

We recommend that you program your password before you install the Keyless Entry. You will not need assistance, and you can test the reception at the mounting location before installation.

If you have a Multi-Function door control:

1.With the door closed, press the four digit password desired, then press and hold Enter.

2.Press and hold the light button on the door control.

3.Press and hold the door control push bar.

4.After the opener lights flash, release all buttons.

If you do not have a Multi-Function door control:

1.Choose a 4-digit password using numbers from 0 to 9 (a number can be used more than once, for example, 4, 0, 4, 1).

2.Press the four buttons for the password, then press and hold the Enter button. The indicator light on the door opener panel will blink.

3.Press and release the “Smart” (learn) button on the opener panel. After the opener lights flash, release the Enter button.

Test by pressing the password, then press Enter. The door should begin to move.

Setting a Temporary Password

In addition to your personal entry password which works at all times, a 4-digit temporary password can be added for the convenience of visitors or service persons. This allows authorized persons a way to gain temporary access.

After a programmed number of hours or number of accesses, this temporary password expires and will no longer open the door. The temporary password can be used to close the door even after it has expired. To set a temporary password:

1.Press the four buttons for your personal entry password (not the last temporary password), then press and hold the ✽ button.

The opener light will blink three times. Release the button.

2.Press the temporary 4-digit password you have chosen, then press Enter.

The opener light will blink four times.

3.To set the number of hours this temporary password will work, press the number of hours (up to 255), then press ✽.

3.To set the number of times this temporary password will work, press the number of times (up to 255), then press #.

The opener light will blink once when the temporary password has been learned.

Test by pressing the four buttons for the temporary password, then press Enter. The door should move. If the temporary password was set to a certain number of openings, remember that the test has used up one opening.

To clear the temporary password, repeat steps 1-3, setting the number of hours or times to 0 in step 3.