Models 973LM and 973LM-Gate Security✚® 3-Button Remote Control
OWNER’S MANUAL
The 900 Series remote control works only with door openers and |
|
|
| WARNING |
| ||
light controls having an orange “Learn” button. |
|
|
|
|
|
| |
Programming instructions are described and illustrated below. |
|
| To prevent possible SERIOUS INJURY or DEATH from a moving gate | ||||
The additional push buttons can also activate other garage door |
|
| |||||
openers and/or light controls. (Instructions for programming light |
|
| or garage door: |
|
| ||
products are included with those accessories.) |
|
|
| • ALWAYS keep remote controls out of reach of children. NEVER |
| ||
Instructions are Described and Illustrated Below |
|
| permit children to operate, or play with remote control transmitters. | ||||
|
| • Activate gate or door ONLY when it can be seen clearly, is properly | |||||
|
|
|
| ||||
|
|
|
| adjusted, and there are no obstructions to door travel. |
| ||
|
|
|
| • ALWAYS keep gate or garage door in sight until completely closed. | |||
| OR |
|
| NEVER permit anyone to cross path of moving gate or door. |
| ||
|
|
|
|
|
|
| |
| 1 | 2 | 3 | Open/Close/Stop Operation |
| ||
— |
|
|
| Your Security✚ | ® | remote control can be programmed to operate | |
|
|
|
|
|
|
| |
— — — | 1 | 2 |
| one door using all 3 buttons: the large button will only open the | |||
— — |
|
|
| door, the middle button will close the door, and the third button | |||
— — |
|
|
| ||||
|
|
| will stop the door’s movement. You may set up this feature as | ||||
|
|
|
| ||||
|
|
|
| follows: |
|
|
|
|
|
|
| 1. With the door closed, press and hold the |
| ||
|
|
|
| large remote push button. |
| ||
1. Press and release the “learn” button on |
|
|
| 2. Press and hold the Lock button on the | Open | ||
|
|
| door control. | Close | |||
the motor unit. The learn indicator light |
|
|
| Stop |
| ||
|
|
|
|
|
| ||
will glow steadily for 30 seconds. |
|
|
| 3. Press and hold the door control push bar. |
| ||
|
|
|
| When the opener lights flash, release all buttons. Test by pressing | |||
2. Within 30 seconds, press and hold the |
|
|
| the large (Open) button on the remote. The door should open. | |||
button on the |
|
|
| Press it again while the door is open and nothing should happen. | |||
|
|
|
| Press the middle (Close) button while the door is moving and it | |||
3. Release the button when the motor unit light |
|
|
| should close. Press the third (Stop) button and the door should | |||
|
|
| stop immediately. |
| |||
blinks. It has learned the code. If light bulbs |
|
|
|
| |||
|
|
|
|
|
|
| |
are not installed, two clicks will be heard. |
|
|
| The Remote Control Batteries |
|
To Erase All Codes From Motor Unit Memory
To deactivate any unwanted remote, first erase all codes:
WARNING
Press and hold the “learn” button on motor unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| To prevent possible SERIOUS INJURY or DEATH: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| • NEVER allow small children near batteries. |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
until the learn indicator light goes out |
|
|
|
|
|
|
|
|
|
|
|
| • If battery is swallowed, immediately notify doctor. |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
(approximately 6 seconds). All previous codes |
|
|
|
|
|
|
|
|
| ||||||||
are now erased. Reprogram each remote or |
|
|
|
|
|
|
| The lithium batteries should produce |
| ||||||||
keyless entry you wish to use. |
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
| power for up to 5 years. To replace, |
| |||||||||
To Control the Opener Lights |
|
|
|
|
|
|
| Battery | |||||||||
|
|
|
|
|
|
| pry open case with visor clip or | ||||||||||
|
|
|
|
|
|
| positive | ||||||||||
With Security✚® remote controls, a remote push button can be | screwdriver, as shown. Insert | side up (+) | |||||||||||||||
batteries positive side up (+). |
| ||||||||||||||||
programmed to operate the opener lights without opening |
|
|
|
|
|
|
| Dispose of old batteries properly. |
| ||||||||
the door. |
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
| |||||||||
1. With the door closed, press and hold the remote button that |
|
| |||||||||||||||
you want to control the light. |
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
| NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
2. Press and hold the Light button on the door control. |
|
|
|
|
|
|
| receiver and/or transmitter are prohibited, except for changing the code setting or replacing the | |||||||||
3. Press and hold the Lock button on the door control. |
|
|
|
|
|
|
| battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. |
| ||||||||
|
|
|
|
|
|
| Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the | ||||||||||
4. After the opener lights flash, release all buttons. |
|
|
|
|
|
|
| following two conditions: (1) this device may not cause harmful interference, and (2) this device must | |||||||||
|
|
|
|
|
|
| accept any interference received, including interference that may cause undesired operation. | ||||||||||
Test by pressing the remote push button. The opener lights |
|
| |||||||||||||||
|
| ||||||||||||||||
should turn on or off but the door should not move. |
|
|
|
|
|
|
| Replacement Parts |
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FOR SERVICE DIAL OUR TOLL FREE NUMBER: |
|
|
|
|
|
|
| 3V2032 Lithium battery: . . . . . . . . . . . . . . . . . . . . . . . . . .10A20 | |||||||||
|
|
|
|
|
|
| Visor clip: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29B137 | ||||||||||
US: |
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
| Owner’s manual - Spanish: . . . . . . . . . . . . . . . . . .114A2210SP | ||||||||||
CANADA: |
|
|
|
|
|
|
| ||||||||||
© 2006, Chamberlain Group Inc. |
| ||||||||||||||||
114A2210G | All Rights Reserved |
|