Chamberlain CLT1 manual

CLICKER

Universal Garage Door Opener Remote Control

Model No. CLT1

Motor Unit

& Receiver

External Ceiling or

Wall Mounted Receiver DIP Switches or

Smart-Learn Button

WARNING

To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:

•ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote control transmitters.

•Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.

•ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.

▼ Step 1 - Set Brand Switch	➡
■ Set brand switches on Clicker
remote. Refer to Table 1.

Remote

Control

The Clicker remote can be programmed to operate up to 2 garage door openers or gates, including different brands. All programming is done using the:

• Brand switches
• Remote control DIP switches			LED
• Remote control push buttons
A and B, and LED indicator
		Button A		Button B
BRAND Switches	ON			BRAND
UP position is ON				Switches
DOWN position is OFF				DIP
				Switches
				Battery
DIP Switches	ON
UP position is ON
DOWN position is OFF			Slide Battery
NOTE: Use pen or small screwdriver			cover down
to move dip switches.			to remove

PREPARATION

Determine the BRAND of the existing garage door opener or handheld remote controls. If all remote controls are lost, the BRAND is located on the ceiling mounted motor unit or on the external receiver near the flexible wire antenna. Also determine if your motor unit/receiver system has DIP switches or a smart-learn button. (Some models require removing the light lens.) Proceed to Step 1 for your specific BRAND switch. For further information consult your garage door opener manual.

Table 1 (Brand Switches)

SYSTEM	FREQ.
	MHZ	BRAND SWITCHES
STANLEY 10 DIP Switches	310	OFF	OFF	OFF	OFF
MULTI-CODE10 DIP Switches	300	ON	OFF	OFF	OFF
LINEAR/MOORE-O-MATIC 8 DIP Switches	310	OFF	ON	OFF	OFF
GENIE 9 DIP Switches	390	OFF	OFF	ON	OFF
GENIE 12 DIP Switches	390	ON	OFF	ON	OFF
CHAMBERLAIN, SEARS,
LIFTMASTER, MASTER MECHANIC,
OR DO IT 7 Dip Switches	390	ON	OFF	OFF	ON
CHAMBERLAIN, SEARS,
LIFTMASTER, MASTER MECHANIC,
OR DO IT 8 Dip Switches	390	OFF	OFF	OFF	ON
CHAMBERLAIN, SEARS,
LIFTMASTER, MASTER MECHANIC,
OR DO IT 9 Dip Switches	390	ON	ON	OFF	OFF
CHAMBERLAIN, SEARS,
LIFTMASTER,
MASTER MECHANIC, DO IT:
YELLOW/WHITE/GRAY Smart-Learn Button	390	ON	ON	OFF	OFF

Proceed to Step 2.

If you have a Green or Orange/Red Smart-Learn Button proceed to Step 3.

CHAMBERLAIN, SEARS,
LIFTMASTER,
MASTER MECHANIC, DO IT,
GREEN Smart-Learn Button	390	ON	ON	ON	OFF
CHAMBERLAIN, SEARS,
LIFTMASTER,
MASTER MECHANIC, DO IT:
ORANGE/RED Smart-Learn Button	390	OFF	ON	ON	OFF