WIRE SAFETY REVERSING SENSOR
3 Run Safety Sensor Wire to Motor Unit and Secure with Insulated Staples
C1
Safety Sensor Wire Insulated Staple
Safety Sensor Wire
C1 | C1 |
Insulated Staple | Insulated Staple |
Do NOT strip any insulation from the staples
Safetyensor Reversing Sensor
SafetyensorReversing Sensor
4 Strip All Safety Sensor | 5 Separate the Black/White | 6 Twist Like Colored Wires | ||
Wires | and the White Wires | Together |
| |
Strip |
|
|
|
|
7/16" (11 mm) |
|
|
|
|
Insulation Wire | Black/White | White |
|
|
|
|
| ||
| Wire | Wire | Black/White | White |
|
|
| Wires | Wires |
7 Connect Safety Sensors to Motor Unit
Locate the quick connect terminals on your garage door opener, they are located on back panel.
Insert the two white wires into the white quick connect terminal and insert the two black/white wires into the grey quick connect terminal
White 
Black/White
Wires 
Wires
Grey
Terminal
C1 Staples
Screwdriver 
White
Terminal
ALL HARDWARE SHOWN
ACTUAL SIZE
19