Mount Keypad

It is recommended that Keypad be mounted to a Gooseneck post or non-metallic surface. If it is necessary to mount Keypad to a metal surface, use a non-metallic spacer to move the Keypad away from the metal surface.

Step 1

Choose mounting location for Keypad. Remove the back panel and attach it to a solid surface or post.

Step 2

Mount the Keypad onto the back panel with screws. Tighten screws with Allen wrench.

Keypad Brightness

When it is dark, the panel will light when it detects movement (up to 5') or when a button is pressed.

Enter Master PIN Number on Keypad:

? ? ? ?

0 8

Enter one of the following brightness levels:

1 OR 2 OR 3

“BEEP”

Default setting is 2.

Battery

The AA batteries (not provided) in the Keypad will typically last up to 3 years depending on use. (Lithium batteries recommended for colder environments.)

FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:

1-800-528-2806

www.liftmaster.com

NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

3