Char-Broil 463247512 manual Rear of Shelf

5

On back of grill, place upper back panel between side panels and above lower back panel.

Secure upper back panel, in lower holes, using one 1/4-20x1½”screw, 7mm lock washer, and 7mm flat washer on each side.

Do not fully tighten screws until side shelf installation is complete in later steps.

1/4-20x1½” 7mm lock 7mm flat

screw washer washer

Upper back panel

6

Insert flange on right side shelf into side shelf brackets on side of firebox, shown A.

Attach rear of shelf using one 1/4-20x3/4”screw, 7mm lock washer, 7mm flat washer and 1/4”nut in upper hole; using one 1/4-20x1½”screw, 7mm lock washer and 7mm flat washer in lower hole, shown B/C.

Attach front of shelf and fascia using two 1/4-20x3/4”screws, 7mm flat washers, 7mm lock washers and1/4”nuts, and one #8x3/8” self-tapping screw with large washer, shown C/D/E.

A

BRear of Shelf

1/4-20x3/4” screw

1/4-20x1½” screw

7mm flat 7mm lock

washer washer

7mm lock	7mm flat
washer	washer
1/4”nut

1/4”nut

C

7mm lock washer

7mm flat washer

DBack of main control panel

#8x3/8” tapping screw

large flat washer

E

1/4-20x3/4” screw

1/4-20x3/4” screw

Note: Insert this screw from the back of main control panel.

7mm lock washer

1/4”nut

7mm flat washer

15