Roadster S4
Rental Staging

Roadster S4

Brightness

4000 ANSI lumens (+/- 10%)

90% brightness uniformity across the screen

Contrast Ratio (1.5-2.2:1 zoom lens)

350:1 ANSI, 500:1 on / off

Resolution/Digital Processing

3 chip 0.9" DMD™‚ (Digital Micromirror Device) system

True SXGA 1280x1024 chip resolution

13 bit user selectable gamma table

More than 1 billion displayable colors

Dynamic Scaling

Resizing capabilities to scale down from 1600x1200 and up from 640x480 to the SXGA resolution of DMD

Independent horizontal and vertical scaling adjustment for graphics and video inputs

Horizontal Frequency Range

15 to 120 kHz

Vertical Frequency Range

24 to 120 Hz

Field Interchangeable Optional Lenses

Fixed short throw lens: 1.2:1

Zoom lenses: 1.5-2.2:1, 2.2-4:1, and 4-7:1

Up to 130% of vertical lens offset for off-axis projection (using a 2.5:4-1 lens)

Up to 80% of horizontal lens offset (using a 2.5:4-1 lens)

Compatibility with VistaGRAPHX lenses: 0.8:1, 2.5-4:1, 4-7:1 (adapter required)

Screen size 1.5m - 12.2m (5ft - 40ft) diagonal

Lens Mount

Motorized horizontal and vertical lens offset, focus and zoom adjustments

Lens "bayonet-style" insertion system

Lens mount tilt adjustment

Built-in light shutter

Rental Staging

Inputs

Built-in RGB/YUV/YPbPr inputs allowing separate H and V syncs, tri-level sync, composite sync and sync-on-green/luma (5 BNC connectors)

Multi-standard Video Decoder Module (NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM) with one composite video input (BNC and RCA connectors) and one S-video input (two BNC and 4-pin mini-DIN connectors)

Slot for an optional input module

Full compatibility with Marquee Signal Switcher and third-party switchers

HDTV/DTV Compatibility

Full HDTV/DTV compatibility on analogue RGB/YPbPr inputs

Accepts 480i, 480p, 576i, 576p, 720p, 1035i, and 1080i formats at all applicable frame/field rates

Accepts 1080p at 24, 25 and 30 Hz frame rates

Optional HDTV Serial Digital Input Module

Various Keypads

Standard hand-held IR backlit remote keypad, front and rear infrared sensors

Built-in backlit keypad

Optional RS422 two-way remote controller with LCD display using 6 pin XLR connector with range of 3000ft

Optional wired backlit remote keypad with 3 pin XLR connector

Control / Networking

Third party control system and switcher compatibility

Dual RS232 ports for computer control, with loop through for connection of multiple projectors

Dual 6 pin XLR RS422 ports for connection of optional LCD two-way controllers and loop-through to multiple projectors up to 600ft (183m)

Diagnostics

Built-in LCD diagnostic display indicates operational status and error messages

Power and Status LED

Full diagnostics through RS232 9 pin D connector

Graphical User Interface

Auto Set-up feature

"Direct Access" intuitive user interface for complete projector control in 5 world languages

On screen user movable menus to fit different image aspect ratios (4:3, 5:4, 16:9, etc.)

On screen help menus

100 channel memories

Auto power feature

Lamp Specification/Color Temperature

700W CERMAX® Xenon illumination system

Pre-aligned lamp module

Constant color temperature over the lamp life

Color temperature adjustment range: 32000K to 93000K

User replaceable lamp within 5 minutes

Typical lifetime: 1,000 hours

Variable Lamp Power Supply/Light Output Control (LiteLOC™)

"Auto Brightness" mode to maintain constant brightness over time

"Lamp Conserve" mode to extend the lamp life

"Max Brightness" mode for maximum light output

Power Requirements

Line voltage 100V AC to 240 VAC +/- 10% @ 50/60 Hz

Power consumption: 1200 W maximum

Thermal dissipation: 3700 BTU/hr

Operating current: 11.5A maximum (at 100 VAC)

Weight and Size

92lbs (41.8kg)

56.6cm (W) x 76.5cm (L) x 30.2cm (H) excluding handles 22.28"(W) x 30.1" (L) x 11.88" (H) excluding handles

Standard Accessories

IR remote keypad with batteries

User’s Manual with warranty card

2.44m (8ft) line cord

Optional Accessories

Serial Digital Input (SMPTE 259M/CCIR 601) with loop through feature

Digital HDTV Input module (with loop through feature) compatible with all known HDTV formats

DVI/DFP Input module

10 bit ADP (Advanced Digital Processing) module

Wired remote keypad

Compatible with all Marquee Input modules

RS422 Two-way remote LCD controller

Optional Accessories continued
Warranty

 Replacement lamp module

 Two years parts and labor on projector (with RoadSERVICE

 Remote infrared sensor

membership)

 Service Manual

 One year on projector light engine

 Librarian communication software

 Accessories: One year

 Transit case

 Extended warranty available

 Stacker Kit

 

Regulatory Approvals
Third Party Test Criteria

 ISTA, IEC 60068-2-64, ASTM D4169-96, MIL STD 810F (Shipping

 CSA, UL and European safety approvals

Vibration & Shock, while in Christie Digital Systems Transit Case)

North American and European EMI/EMC approvals

Due to constant research, specifications are subject to change without notice

 

 

These and other locations worldwide

 

 

10550 Camden Drive,

809 Wellington Street North,

ViewPoint

Hohenzollernstraße 124-126

627A Aljunied Road

Cypress CA 90630

Kitchener ON

200 Ashville Way, Wokingham

41061 Mönchengladbach

#05-02 Biztech Centre

USA

Canada, N2G 4Y7

Berkshire RG41 2PL

Germany

Singapore 389842.

Tel: +1(714) 236-8610

Tel: +1(519) 744-8005

United Kingdom

Tel: +49 (0) 2161 664540

Tel: +65 877-8737

1-800-407-7727

1-800-265-2171

Tel: +44 (0) 118 977 8000

Fax: +49 (0) 2161 664546

Fax: +65 877-8747

1-800-333-3816

Fax: +1(519) 749-3136

Fax: +44 (0) 118 977 8100

 

 

Fax: +1(714) 503-3375

 

 

 

 

 

 

 

 

 

WorldWide Web Address: http://www.christiedigital.com

NA/February2002