Christie Digital Systems S5 manual

Vista S5

Fixed Installations

Brightness

5000 ANSI lumens
90% brightness uniformity across the screen

Contrast Ratio (1.5-2.2:1 zoom lens)

350:1 ANSI, 400:1 full field

Resolution/Digital Processing

3 chip 0.9" DMD™‚ (Digital Micromirror Device) system
True SXGA 1280x1024 chip resolution
13 bit user selectable gamma table
More than 1 billion displayable colors

Dynamic Scaling

Resizing capabilities to scale down from 1600x1200 and up from 640x480 to the SXGA resolution of DMD

Independent horizontal and vertical scaling adjustment for graphics and video inputs

Horizontal Frequency Range

15 to 120 kHz

Vertical Frequency Range

24 to 120 Hz

Field Interchangeable Optional Lenses

Fixed short throw lens: 1.2:1
Zoom lenses: 1.5-2.2:1, 2.2-4:1, and 4-7:1
Up to 130% of vertical lens offset for off-axis projection
Up to 80% of horizontal lens offset
Compatibility with VistaGRAPHX lenses: 0.8:1, 2.5-4:1, 4-7:1 (adapter required)
Screen size 1.8m - 12.2m (6ft - 40ft) diagonal

Vista S5

Fixed Installations

Lens Mount

Manual horizontal and vertical lens offset, focus and zoom adjustments
Lens "bayonet-style" insertion system
Lens mount tilt adjustment
Built-in light shutter

Inputs

Built-in RGB/YUV/YPbPr inputs allowing separate H and V syncs, composite sync and sync-on-green/luma (5 BNC connectors)

Multi-standard Video Decoder Module (NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM) with one composite video input (BNC and RCA connectors) and one S-video input (two BNC and 4-pin mini-DIN connectors)

Built-in Audio Control Module with 4 stereo audio inputs and 1 stereo output (RCA connectors)

Slot for an optional input module
Full compatibility with Marquee Signal Switcher and third-party switchers

HDTV/DTV Compatibility

Full HDTV/DTV compatibility on analogue RGB/YPbPr inputs

Accepts 480i, 480p, 576i, 576p, 720p, 1035i, and 1080i formats at all applicable frame/field rates

Accepts 1080p at 24, 25 and 30 Hz frame rates
Optional HDTV Serial Digital Input Module

Various Keypads

Standard hand-held IR backlit remote keypad, front and rear infrared sensors

Built-in backlit keypad

Optional RS422 two-way remote controller with LCD display using 6 pin XLR connector with range of 600ft (183m)

Optional wired backlit remote keypad with 3 pin XLR connector

Control / Networking

Third party control system and switcher compatibility

Dual RS232 ports for computer control, with loop through for connection of multiple projectors

Dual 6 pin XLR RS422 ports for connection of optional LCD two-way controllers and loop-through to multiple projectors up to 600ft (183m)

Diagnostics

Built-in LCD diagnostic display indicates operational status and error messages
Power and Status LED
Full diagnostics through RS232 9 pin D connector

Graphical User Interface

Auto Set-up feature

"Direct Access" intuitive user interface for complete projector control in 5 world languages

On screen user movable menus to fit different image aspect ratios (4:3, 5:4, 16:9, etc.)

On screen help menus
100 channel memories
Auto power feature

Lamp Specification/Color Temperature	Power Requirements
1200W CERMAX® Xenon illumination system	Line voltage 220V AC to 240 VAC +/- 10% @ 50/60 Hz
Pre-aligned lamp module	Power consumption: 1700 W maximum
Constant color temperature over the lamp life	Thermal dissipation: 5840 BTU/hr
Color temperature adjustment range: 32000K to 93000K	Operating current: 8.5A maximum
User replaceable lamp within 5 minutes

Typical lifetime: 1,000 hours	Weight and Size
Variable Lamp Power Supply/Light Output Control (LiteLOC™)	39.9kg (88lbs)
	56.6cm (W) x 76.5cm (L) x 30.2cm (H)
"Auto Brightness" mode to maintain constant brightness over time	22.28"(W) x 30.1" (L) x 11.88" (H)
"Lamp Conserve" mode to extend the lamp life	Standard Accessories
"Max Brightness" mode for maximum light output
	IR remote keypad with batteries
	User’s Manual with warranty card
	2.44m (8ft) line cord

Optional Accessories

Serial Digital Input (SMPTE 259M/CCIR 601) with loop through feature

Digital HDTV Input module (with loop through feature) compatible with all known HDTV formats

DVI/DFP Input module
10 bit ADP (Advanced Digital Processing) module
Wired remote keypad
Motorized lens mount upgrade
Compatible with all Marquee Input modules
RS422 Two-way remote LCD controller
Replacement lamp module

Remote infrared sensor
Service Manual
Librarian communication software
Transit case

Regulatory Approvals

CSA, UL and European safety approvals
North American and European EMI/EMC approvals

Warranty

One year parts and labor
Accessories: One year

Due to constant research, specifications are subject to change without notice

		These and other locations worldwide
10550 Camden Drive,	809 Wellington Street North,	ViewPoint	Hohenzollernstraße 124-126	627A Aljunied Road
Cypress CA 90630	Kitchener ON	200 Ashville Way, Wokingham	41061 Mönchengladbach	#05-02 Biztech Centre
USA	Canada, N2G 4Y7	Berkshire RG41 2PL	Germany	Singapore 389842.
Tel: +1(714) 236-8610	Tel: +1(519) 744-8005	United Kingdom	Tel: +49 (0) 2161 664540	Tel: +65 877-8737
1-800-407-7727	1-800-265-2171	Tel: +44 (0) 118 977 8000	Fax: +49 (0) 2161 664546	Fax: +65 877-8747
1-800-333-3816	Fax: +1(519) 749-3136	Fax: +44 (0) 118 977 8100
Fax: +1(714) 503-3375

WorldWide Web Address: http://www.christiedigital.com

NA/February2002