Tips for
Setting up the Fiery in a UNIX environment has the same requirements as setting up any printer or new device:
•A distinct IP address is required for the Fiery as well as for each workstation on the network.
•A name must be selected for the Fiery that goes with the IP address.
•The IP address of the Fiery must be registered for the network in a host name database, and also on the Fiery itself.
•At least one print connection (Print or Hold) must be published.
The following information applies especially to the Fiery:
•The Fiery contains a printer controller that understands lpd protocols.
•The Fiery has a remote printer name you must use in order to communicate with it successfully.
For details, see the following section.
Important note about the remote printer name
Whichever UNIX system you use, the name used for the remote printer (or rp in the /etc/printcap file) in configuring the Fiery must be one of the following:
print hold
The remote printer name is also used when setting up a Windows NT 4.0/2000/XP/ Server 2003 workstation or Windows NT 4.0/2000/Server 2003 server to connect to the Fiery over TCP/IP. Enter the remote printer name when you set up your Windows NT 4.0/2000/Server 2003 printer, as the “Name of printer or print queue on that (lpd host) server” in the Add LPR Compatible Printer dialog box.
For the Windows 2000/XP printer driver, enter the remote printer name for Queue Name under LPR Settings in the Configure Standard TCP/IP Port Monitor dialog box.