44-16 Performing Setup from the Control Panel

Delete Filter

Yes/No [No]

This option allows you to delete IP addresses individually or by range.

Edit Filter

Yes/No [No]

This option allows you to make changes to IP addresses or a range of IP addresses to be permitted or rejected.

If you selected Yes to enable IP filtering, these options appear. Add, delete, and edit filters as required. To add filters, enter the IP address, IP range, and accept the

filter policy.

IP Port Setup. All ports not listed in the following setup options are closed. Supported protocols are listed in parenthesis after the port number.

Configure IP Ports

Yes/No [Yes]

Select Yes to proceed to the subsequent IP Port settings.

20-21 (FTP) Enabled/Disabled [Enabled]

Select Enable to enable the 20-21 (FTP) ports.

23(Telnet) Enabled/Disabled [Enabled]

Select Enable to enable the 23 (Telnet) port.

80(HTTP) Enabled/Disabled [Enabled]

Select Enable to enable the 80 (HTTP) port. (Fiery WebTools and IPP printing)

137-139 (NetBIOS) Enabled/Disabled [Enabled]

Select Enable to enable the 137-139 (NetBIOS) ports. (SMB printing)