Network Setup
Service Setup
PServer Setup
Bindery Setup
Add File Server
This option gives you two ways to add a Novell NetWare file server.
Select File Server
From List/Search by Name [From List]
You may select the file server from a scrollable list, or by a name search. Choose From List if your network does not have a large number of file servers. Choose Search by Name if the number of file servers is so large that scrolling through the list would take a long time.
If you selected From List: | If you selected Search by Name: |
Add Server
List of all servers
The Fiery obtains a list of NetWare file servers by querying the IPX network. Use the up and down arrow buttons to select a NetWare file server from the list. Choose the server on which you have configured a print server and print queue to handle Fiery print jobs.
Enter First Letters of Server Name
Use the up and down arrow buttons to enter the first letters of the name of the file server you want to use, and then press Enter.
Add Server
List of servers matching the search
This option is displayed if you entered letters to search. Scroll through the list to select the server you want.
Once you have chosen a file server, the Fiery immediately tries to log in as a guest without a password. If it succeeds, it skips to the NetWare Print Server option.
If you try to add a file server but all Fiery connections are already in use, you are prompted to remove a file server (see “Remove File Server” on page