Cisco Systems 10BASE-FL, PA-5EFL= Two Port Adapters on a VIP2-50 Horizontal Orientation Shown

Port Adapter Locations on the VIP2 and in the Cisco 7200 Series Routers

Figure 2 Two Port Adapters on a VIP2-15 or VIP2-40 (Horizontal Orientation Shown)

Bus connector	CPU Boot ROM
	U6
	U2	DRAM
SRAM		SIMMs
	U4
DIMM U5
Port adapter		Port adapter
in slot 0		in slot 1
		H6448

Figure 3 Two Port Adapters on a VIP2-50 (Horizontal Orientation Shown)

Boot ROM	CPU
Bus connector
SRAM
daughter	DRAM DIMM
card

Port adapter in slot 0

Port adapter in slot 1

H10447

Note In the Cisco 7000, Cisco 7507, and Cisco 7513 chassis, the VIP2 is installed vertically. In the Cisco 7010 and Cisco 7505 chassis, the VIP2 is installed horizontally.

Figure 4 shows a Cisco 7206 with port adapters installed. In the Cisco 7206 and Cisco 7206VXR, port adapter slot 1 is in the lower left position and port adapter slot 6 is in the upper right position. The Cisco 7204 and Cisco 7204VXR are not shown, but have four port adapter slots; PA-5EFL can be installed in any of these four slots.

PA-5EFL Ethernet 10BASE-FL Port Adapter Installation and Configuration 9