5-69
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfadapgain
cnfadapgain
To enable or disable the DSP adaptive gain feature, use the cnfadapgain command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
cnfadapgain adap-gain-enable
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures when using this command.
Examples The following example shows that the adaptive gain feature is enabled:
cnfadapgain 1
Related Commands There are no related commands.
adap-gain-enable Enables or disables adaptive gain. It can be o ne of the fol lowing value s:
•1 = On
•2 = Off