5-130
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfconcacpol
cnfconcacpol
To configure the policies for fax/modem upspeed connection admission control (CAC) failure and
fax/modem carrier loss for calls added to a particular IP or AAL2 LCN, use t he cnfconcacpol command
in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
cnfconcacpol lcn carrier-loss-pol cac-reject-pol
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines If you select 3 (unspecified) for the carrier-loss-pol or cac-reject-pol argument values, the card level
default are used.
Examples The following example shows that LCN 131 is configured with a carrier loss policy of 1 (if carrier is lost,
the LCN reverts to the previous codec) and a CAC rejection policy of 2 (the LCN connection is
maintained):
cnfconcacpol 131 1 2
Related Commands
lcn Logical channel number of the connection; in the ra nge fr om 13 1 to 51 0.
carrier-loss-pol Carrier loss policy. It can be one of the following values:
•1 = Revert to the previous codec
•2 = Maintain the upspeed codec
•3 = Unspecified
Note If you select 3 (unspecified), the card level default is used.
cac-reject-pol CAC rejection policy. It can be one of the following values:
•1 = Delete the connection
•2 = Maintain the connection
•3 = Unspecified
Note If you select 3 (unspecified), the card level default is used.
Command Description
cnfconvbdpol Configures the policies for fax/modem upspeed CAC failure and fax/modem
carrier loss for calls added to a particular IP or AAL2 LCN.