5-201
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfrtprxtimer
cnfrtprxtimer
To enable or disable the receipt of Real-Tim e Transport Protoc ol (RTP) messages on a VISM card, use the
cnfrtprxtimer command in the VoIP switching/trunking operating mode.
cnfrtprxtimer rx-timer
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines If you enable the receipt of RTP messages (rx-timer = 2) and no RTP messages are received on a
particular connection for 5 seconds, the gateway initiates a connection deletion. You cannot configure
the 5-second time limit.
Examples The following example shows that the receipt of RTP messages is enabled for the current VISM card:
cnfrtprxtimer 2
Related Commands There are no related commands.
rx-timer Enables or disables the receipt of RTP messages. It can be one of the following
values:
•1 = Disable
•2 = Enable