5-260
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dellnloop
dellnloop
To delete the T1 or E1 local line loopbac k state f or a VISM card, use the dellnloop command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dellnloop ds1-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the local loopback for line 6 is deleted:
dellnloop 6
Related Commands
ds1-num DS1 line number on the VISM card for which the local loop is to be deleted, in the
range from 1 to 8.
Command Description
dspln Displays the data configured on a specified line.