5-280
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspaal2params
dspaal2params
To display AAL2 configuration parameters, use the dspaal2params command in the switched AAL2
PVC and AAL2 trunking operating modes.
dspaal2params
Syntax Description This command has no arguments or keywords.
Command Modes Switched AAL2 PVC and AAL2 trunking
Usage Guidelines Use this command to display the following AAL2 configuration parameters:
•DTMF relay status
•CAS bit transport status
•Type3 redundancy status
•VAD timer value
•CID fill timer value
Examples The following example shows that the AAL2 configuration parameters are displayed:
dspaal2params
AAL2 DTMF RELAY: Off
AAL2 CAS BITS TRANSPORT: Off
AAL2 TYPE3 REDUNDANCY: On
AAL2 VAD TIMER: 250
AAL2 CID FILL TIMER: 30
Related Commands Command Description
cnfaal2timerparams Configures the holdover time for VAD before activating silence suppression
on an AAL2 PVC.
cnfaal2transparams Configures the transportation of DTMF and CAS bit s to a nothe r e ndp oint
and enables or disables the type 3 packet triple redundancy feature.