5-353
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsplapds
dsplapds
To display configuration data about all Link Access Protocol for ISDN D channels (LAPDs), use the
dsplapds command in the VoIP switching/trunking operating mode.
dsplapds
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data for all LAPDs is displayed:
dsplapds
Line number DS0 number Lapd Application Type
------------------------------------------------
1 1 PRI
Related Commands Command Description
addlapd Adds an LAPD.
dellapd Deletes an LAPD.
dsplapd Displays configuration data about an LAPD.