5-397
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsprsvpif
dsprsvpif
To display the Resource Reservation Protocol (RSVP) status of a specified connection, use the dsprsvpif
command in the VoIP switching/trunking and VoIP and switched ATM AAL1 SVC operating modes.
dsprsvpif lcn
Syntax Description
Command Modes VoIP switching/trunking and VoIP and switched ATM AAL1 SVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the RSVP status of LCN 142 is displayed:
dsprsvpif 142
Interface: 142
RSVP: Enable
Refresh Interval: 45 sec
Refresh Multiple: 7
Related Commands
lcn Logical channel number of the connection for which you want to display the
RSVP status; in the range from 131 to 510.
Command Description
cnfrsvp Configures RSVP for a specified connection.
cnfrsvprefreshmiss Configures the number of times VISM waits for a missed RSVP minimum
refresh message for a specified connection.
dsprsvpreq Displays the data associated with a specified RSVP request.
dsprsvpreqs Displays all RSVP-known requests on the current VISM card.
dsprsvpresv Displays all data associated with an RSVP bandwidth reservation.
dsprsvpresvs Displays all incoming RSVP-known reservations on the current VISM card.
dsprsvpsender Displays all data associated with a specified RSV P path s tate .