5-478
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcperrcnt
dspxgcperrcnt
To display the Simple Gateway Control Protocol (SGCP)/Media Gateway Control Protocol (MGCP)
error counts for both unsupported protocol versions and unrec ognize d p ackets, use th e dspxgcperrcnt
command in the VoIP switching/trunking operating mode.
dspxgcperrcnt
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the xGCP error counts for unsupported protocol versions and
unrecognized packets are displayed:
dspxgcperrcnt
Number of msg. for an unsupported protocol version : 0
Number of unrecognized packets : 0
Related Commands There are no related commands.