Unpacking/General Installation (All Dryers)

UNPACKING

GENERAL INSTALLATION(ALL DRYERS)

Upon arrival of the equipment, any damage in shipment should be reported to the carrier immediately.

Upon locating permanent location of a unit, care should be taken in movement and placement of equipment.

See outline clearance diagrams for correct dimensions.

Remove all packing material such as: tape, manuals, skid, etc.

Leveling: Use spirit level on top of dryer. Adjust leveling bolts on dryer (see adjustable leveling bolts in maintenance section).

Check voltage and amperes on rating plate before installing the dryer.

The construction of Cissell dryers permits installation side-by-side to save space or to provide a wall arrangement. Position dryer for the least amount of exhaust piping and elbows, and allow free access to the rear of dryer for future servicing of belts, pulleys and motors. Installation clearance from all combustable material is 0” ceiling clearance, 0” rear clearance, and 0” side clearance.

Before operating dryer, open basket door and remove blocking between front panel and basket. Read the instruction tags, owner's manual, warnings, etc.

IMPORTANT

Openingtheclothesloadingdoordeactivatesthedoorswitch to shut off the motors, fan, gas, steam, or electric element. To restart the dryer, close the door and press in the push to start buttonandholdbriefly.

IMPORTANT

This dryer is designed for a capacity maximum load. Overloadingitwillresultinlongdryingtimesanddampspots on some clothes.

IMPORTANT

Maximumoperatingefficiencyisdependentuponproperair curculation. The lint screen must be kept cleaned daily to insure proper air circulation throughout the dryer.

IMPORTANT

Provideadequateclearanceforairopeningintothecombustion chamber.

Page 8