SIRIUS Satellite Radio Operations
This function is available when this unit is connected to the SCC1, SiriusConnect Vehicle Tuner, (sold separately) with the SIRIUS SSP cable.
Selecting a Satellite Radio mode
1.Press the [SOURCE] button.
The system changes to the specified Satellite Radio mode.
Selecting a band
1.Press the [BAND] button to select a band. This changes the reception band as follows: SR1 ➜ SR2 ➜ SR3...
●Information displayed during reception The following information is displayed when the satellite radio cannot be received normally.
•When the tuner is not being connected: “NO TUNER”.
∗In this time, please turn off the power and connect the tuner to this unit.
•When the antenna is not being received: “ANTENNA ERROR”.
•When no signal is received: “NO SIG”.
•When the contract of the channel is being updated: “SUB UPDT”.
•When the channel map is being updated: “UPDATING”.
•A channel without a broadcast has been selected: “INVALID CH”.
•A channel not covered by your contract: “UNSUB CH” (alternated)
•When simulate firmware update: “F/W UPDATE”.
Confirming your SIRIUS ID
1.Switch to channel 0.
∗For details, see the following operation descriptions.
2.The SIRIUS ID appears in the display.
Channel input directly
This function allows you to input the channel No. directly.
1.Press and hold the [DISP] button.
2.Press the [x] or [v] button to select “DIRECT”.
3.Press the [ROTARY] knob.
4.Press the [x] or [v] button to move the cursor.
5.Turn the [ROTARY] knob to select a number.
6.Press and hold the [ROTARY] knob.
Notes:
•If no operation is performed within 10 seconds, it will return to the previous mode.
•If you select the Parental Locked channel, the
“CH LCKED” will appear in the display for 2 sec. Then it will remind you to enter the password (For details, see the chapter “Parental Lock function” (page 14)).
Channel selection
1.Channels are selected with the [x] or [v] button.
∗For details, see the following operation descriptions.
Notes:
•The audio output is muted and other button operations are not accepted during channel selection.
•The Parental Locked, unsubscribed and invalid channels will be skipped and can not be tuned.
Recalling a preset station
A total of 18 satellite radio stations can be stored.
This allows you to store your favorite satellite radio stations in memory for later recall.
1.Press the [BAND] button to select the desired band.
2.Turn the [ROTARY] knob to select the desired preset station.
English
Displaying channel labels
1.Press the [DISP] button to select the desired channel label.
Channel ➜ Category ➜ Title (Artist) ➜ Composer ➜ Channel...
Preset memory
1.Press the [BAND] button to select the desired band.
2.Select the desired channel.
3.Press and hold the [DIRECT] button (2 sec.) to store the current channel into preset memory.
CX501 13