English | Basic Operations | ||
Adjusting the fader | |||
| |||
| 1. | Press the | |
| 2. | Turning the [ROTARY] knob clockwise | |
|
| emphasizes the sound from the front | |
|
| speakers; turning it counterclockwise | |
|
| emphasizes the sound from the rear | |
|
| speakers. | |
|
| ∗ The factory default setting is “0”. (Adjustment | |
|
| range: F12 to R12) | |
| 3. | When the adjustment is complete, press the | |
|
| ||
|
| mode is reached. |
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
∗The factory default setting is off.
1.Press and hold the
2.Press and hold the
CT (Clock Time) function
The CT function receives CT data sent from an RDS station and displays the time. Press the [D] button to switch to the CT display.
∗If a CT data is not being received, “CT–
Note:
•CT data is not transmitted in some countries and by some broadcast stations. Also, in some areas, the CT may not display accurately.
Radio Operations
Listening to the radio
1.Press the [FNC] button and select the radio mode. The frequency or PS and PTY appears in the display.
∗PS: Programme service name
∗PTY: Programme type
2.Press the [BND] button and select the radio band. Each time the button is pressed, the ra- dio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1...
3.Press the [a] or [d] button to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity.
1.Press the [BND] button and select the de- sired band (FM or AM (MW, LW)).
2.Tune into a station.
∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available.
∗If “TA” is lit in the display, TP stations are auto- matically sought.
●DX SEEK
Press the [a] or [d] button to automatically seek a station.
When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies.
∗When seek tuning starts, “DX SEEK” appears in the display.
●LOCAL SEEK
If you press and hold the [a] or [d] button for 1 second or longer, local seek tuning is carried out. Broadcast stations with good reception sensitivity are selected.
∗When local seeking starts, “LO SEEK” appears in the display.
14 DXZ748RMP