English connectionmanual Installationand Wire
8. WIRE CONNECTIONS
| Gray | Yellow | |
| Video output | ||
|
| ||
| Black | Yellow | |
| Video input | ||
|
| ||
White |
| White | |
Gray | Black | ||
Audio output | Audio input | ||
| |||
(left) |
| (left) | |
Red |
| Red | |
Gray | Black | ||
Audio input | |||
Audio output |
| (right) | |
(right) |
| ||
|
|
TB741P/TB742P only |
|
|
Radio antenna |
|
|
output terminal (✻1) |
|
|
|
| Main antenna |
|
| input terminal |
Radio antenna |
|
|
input terminal (✻2) |
|
|
|
| TV antenna terminal |
|
| (MINI ø3.5) (✻7) |
|
| System expansion |
Ground lead (✻5) | Black | terminal |
| ||
|
| |
Main power supply lead (✻4) | Yellow |
|
Red |
| |
Accessory power supply lead (✻3) |
| |
|
| |
Illumination power supply lead | Orange/white |
|
Bright green |
| |
Parking brake lead (✻6) |
| |
|
| |
(✻8) | Brown |
|
|
|
*1: Connect this to the antenna input terminal on the car stereo. (TB741P/TB742P only)
*2: Connect the vehicle’s radio antenna to this. (TB741P/TB742P only)
*3: Connect to the power supply terminal which can be turned on and off by the ignition switch.
*4: Connect to the power supply terminal where the power is always supplied regardless of whether the ignition switch is turned on or off.
*5: Connect securely to the metal part of the vehicle with a screw, etc.
*6: Connect to the ground lead of the parking brake lamp in the instrument panel.
*7: There are four antenna terminals: Main and sub. When there is one vehicle side antenna connector, connect it to the main terminal.
*8: It is not connected.
Notes:
•The unit cannot be used on its own. It must be used in combination with the car stereo.
•The main power cord (yellow) must be connected to the prescribed location. Malfunctioning may occur if it is connected together with other cords at the same location.
26 TB741P/TB742P/TB743W