AUDIO ADJUSTMENT
1. Press the Volume Up and Down buttons on the unit or remote control to
adjust the volume output level.
2. To mute the unit, press the Mute button on the remote control. Press button
again to restore audio.
FM TRANSMITTER
When used in a vehicle that has a FM radio, the TVS5091 can broadcast audio
which is received through the FM antenna of the radio.
1. Place the FM Transmit switch to the setting “1”.
2. Turn the car radio ON and tune the FM dial to 88.7. The TVS5091 audio
will now broadcast through the car’s audio system.
NOTE: If 88.7 is occupied with a local FM station, tune FM dial to 89.1 and place
the FM Transmit switch to the setting “2”.
CARE AND MAINTENANCE
Cleaning the cabinet:
•Use a soft, dry cloth to gently wipe off any dirt.
•Do not use benzene, thinner, car cleaner, etc., as these substances may
damage the cabinet or cause the paint to peel.
Cleaning the LCD panel:
•Use a soft, dry cloth to gently wipe off any dust.
•The surface is easily scratched; do not rub it with hard objects.
TROUBLESHOOTING
Before assuming malfunction of the TV, check the following:
Problem:
No power.
Solution:
•The AC Adapter or car cord may not be properly connected – Connect it
correctly.
•The car cord fuse may be burned out – Replace fuse.
•The may be off. Check that both the Power switch and Power button are
“ON”.
Problem:
The remote control unit does not work.
Solution:
•The batteries in the remote control may be inserted incorrectly or the
batteries are dead – Check batteries and replace if necessary.
•The remote distance may be too far – Distance must be less than 2 meters.
•The direction of the remote may be improper – Point the remote control unit
directly to the remote sensor.
8