How to Prepare The Machine for Operation
1.Before assembling the Litter Vac, remove all parts of the machine from the two cartons. Fasten the handles and the filter bag to the main frame. Follow the instructions in the handle carton.
HOW TO CHECK THE OIL
WARNING: Do not check the engine oil level when the engine is running. Failure to check the oil level before you use the machine can destroy the engine. Always make sure the machine has the correct amount of oil.
Follow this procedure to check the oil:
1.Make sure the machine is on level ground.
2.Turn the cap marked "Engine Oil" counterclockwise.
3.Lift the dipstick out of the tube.
4.If the mark is below "OK", add oil. See figure 1.
5.When adding oil, make sure the oil does not pass the mark "FULL" on the dipstick.
See the engine manual for the correct type of oil.
HOW TO FILL THE GASOLINE TANK
WARNING: Fill the gasoline tank in an open area. Do not fill the tank near open flames. Do not fill the gasoline tank while the engine is running. Gasoline is very flammable andcreatesvapors. Seriousinjury to the operator or others could occur.
WARNING: Gasoline is very flammable. When filling the gasoline tank, make sure the gasoline does not enter the extension. See figure 2. Make sure you do not spill any gasoline. Use a cloth to remove spilled gas.
WARNING: Do not mix oil with the gasoline. Damage to the engine could occur.
Fill the gasoline tank only with regular unleaded gasoline. The tank holds four quarts. Use a clean container. Prevent dirt and debris from falling into the tank. Always tighten the cap on the tank.
Figure 1
Figure 2
Clarke® Operator's Manual | Page 5 |