Technical Specifications, Characteristic | Cobalt Networks 9084

IntroductionTechnical Specifications

Technical Specifications

Table 1-2 lists the technical specifications for the 9084 HD/SD-SDI RGB
Color Corrector with YCbCr Video Proc and Frame Sync card.
Table 1-2 Technical Specifications

Item	Characteristic

Part number, nomenclature	9084 HD/SD-SDI RGB Color Corrector with YCbCr Video Proc
	and Frame Sync

Installation/usage environment	Intended for installation and usage in frame meeting openGear™
	modular system definition.

Power consumption	< 15 Watts maximum

Environmental:
Operating temperature:	32° – 104° F (0° – 40° C)
Relative humidity (operating or storage):	< 95%, non-condensing

Frame communication	10/100 Mbps Ethernet with Auto-MDIX.

Indicators	Card edge display and indicators as follows:
	• 4-character alphanumeric display
	• Status/Error LED indicator
	• Input Format LED indicator

Controls	Card edge switches as follows:
	• Menu Enter pushbutton switch
	• Menu Exit pushbutton switch
	• Up/down selection toggle switch

Serial Digital Video Input	Data Rates Supported:
	SMPTE 292 HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
	SMPTE 259M-C SD-SDI: 270 Mbps
	HD Frame Rates Supported:
	720p 23.98; 24; 25; 29.97; 30; 50; 59.94
	1080i 25; 29.97
	1080p 23.98; 24; 25; 29.97; 30
	1080p/sF 23.98; 24

9084-OM (V4.0)

9084 PRODUCT MANUAL

1-11

Image 15

Cobalt Networks 9084 manual Technical Specifications, Characteristic

Contents

Cobalt Digital Inc 9084 Copyright DisclaimerTrademark Information Table of Contents Operating Instructions Overview Introduction SupportDownloads link at Card Software Versions and this Manual E201 Manual Conventions Labeling Symbol Definitions Safety Summary Input/Outputs Functional Description Processor VideoColor Corrector AFD Inserter Color CorrectorVideo Processor Frame Sync Function Controller Card Computer with NIC DashBoard Remote ControlUser Control Interface Card Edge Controls Other cards installed in openGear frames such as the Cobalt Rear I/O Modules Video Formats Supported byRaster Structure Frame Rate Characteristic Technical Specifications Technical Specifications Introduction Cobalt Digital Inc. Limited Warranty Warranty and Service Information Web General Information Technical Support Contact Cobalt Digital IncPhone Fax This page intentionally blank Installing the 9084 Into a Frame Slot Installation and Setup Installing the 9084 Into a Frame Slot Installing a Rear I/O Module Installation and Setup Rear I/O Module Installation Setting Up 9084 Network Remote Control Control and Display Descriptions Operating Instructions Submenu a Submenu b Submenu z Individual Parameters Function Submenu/Parameter Submenu Overview Function Card Edge Controls, Indicators, and Display Card Edge Control Menu/Submenu Structure Menu Depth LEDsNone ClrC Card Edge Setup Abbreviated DiagramVid Submenu Depth S p DashBoard User Interface Set Enable to On Channel Black AdjCorrection Control Panel Setup of Example Video Proc Function Cobalt Remote Control Panel User Interfaces Accessing the 9084 Card Using DashBoard Accessing the 9084 Card via Remote Control Accessing the 9084 Card Using a Cobalt Remote Control Panel Software Version Number Checking Card Using Info Card Edge ControlsPower Consumption and Temperature Displays Checking 9084 Card Information Line No. Limiting Format Default Line No. / RangeAncillary Data Line Number Locations and Ranges Format Function Submenu Item Function Submenu List and Descriptions Luma Lift Reset to UnityVideo Proc Luma Gain Black Hard Clip Color PhaseColor Gain Gang Luma and Color Gain Applies white soft clip limiting at specified percentage Applies white hard clip limiting at specified percentage50.0% to 109.1% null = 109.1% Card Edge Control Menu Output Line Output ModeIncoming AFD Output Code Black Adj. Green Red Blue Operating Instructions White Adj. Green Red Blue Gang Black Level Controls Gang Gamma Controls Framesync Enable Vertical Delay ControlHorizontal Delay Control Framesync Status Display Video Delay DisplayLoss of Input Signal Selection Minimum Latency Frames Control Custom Color Saturation Reset FramesyncFramesync LOS Freeze Color Custom Color Hue Selected Preset drop-down list Preset Name field and Preset Save buttonPreset Load button and the Selected Preset Preset Save and Load Download Presets Reset Current PresetFunction Parameter/Setting Video Proc Preset Name Anchor Desk Set with Monitor Color and Video Correction Examples UsingFeed To Switcher On-Set Monitor Color Correction Example 10 Uncorrected Uncompensated Monitor Waveform To Switcher From Monitor Video Feed 12 Applying Correction to Example Monitor Waveform Signal Miscellaneous Color and Video Correction Examples Condition Observed On Waveform Monitor Correction Using Luma gain less than 100% level as shown below for VAR10.PNG VAR10A.PNG Error and Failure Indicator Overview Troubleshooting Alphanumeric Card Edge Status/Error Indicators and DisplayStatus/Error Input Format Indicators Indicators Character Alphanumeric Display Indicator Icon or Display Error Description DashBoard Status/Error Indicators and Displays 15 Selecting Specific Cards for Card Info Status Display Checks Basic Troubleshooting Checks Symptom Error/Condition Corrective Action Processing Error Troubleshooting Case of Problems Troubleshooting Network/Remote Control ErrorsPage 2406 E. University Ave. Urbana, IL 9084-OM