Cobra Electronics 29 LX LE - page 19

Operation
19
Setting
Brightness
Mode
Setting Brightness Mode
Press.Menu/Enter.knob.to.select.Set Brightness
Rotate.Menu/Enter.knob.clockwise.to.Select
Brightness..Press.Menu/Enter.knob.to.select.
Day-Bright..Turn.Menu/Enter.clockwise.to.
increase.brightness.and.turn.counter-clockwise.to.
decrease.brightness..
To.set.the.day.bright.level,.turn.the.Menu/Enter.
knob.clockwise.to.a.desired.setting.and.then.
press.Menu/Enter. To.set.the.Night-Dim level,.
repeat.instructions.above.then.select.Night-Dim.
Press.Menu/Enter.knob.again.to.exit.routine..
Note
If an attempt is made to
exceed the highest or lowest
brightness levels, 3 error beeps
will be heard.
Note
Exit will return to menu mode.
ESC will exit and return to CB
Standby.
Weather Auto
Scan
Note
To select day or night levels,
press and release Dim/Escape
button once levels are set.
Note
To toggle from day to night
settings, see page 24.
Setting
Contrast Mode
Setting Contrast Mode
Press.Menu/Enter.knob.and.rotate.clockwise.to.
select.Set Contrast...Press.Menu/Enter.knob.
again.and.rotate.clockwise.to.increase.contrast,.
counter-clockwise.to.decrease.contrast..
Press.Menu/Enter.knob.to.set.contrast..
Press.Menu/Enter.knob.again.to.exit.routine..
Note
If an attempt is made to
exceed the highest or lowest
contrast levels, 3 error beeps
will be heard.