Adjustment of the Projection Image

Adjusting the Projection Image

Adjust the projection image to the screen.

Right angle

•When the image is shifted to the left or right, move the projector horizontally. (Align the center of the screen with the center of the projector lens.)

•When the image is shifted up or down, use the tilt foot to adjust the projector vertically.

•When the image is slanted, turn the left or right tilt foot to adjust.

•When there is keystone distortion of the image, adjust with "Keystone" of the menu operations. → See Pages E-33 and 38.

Making Focus/Zoom Adjustments

Turn the focus ring/zoom lever of the projection lens and adjust the projection image.

Adjusting the Tilt (Slant)

Adjustment of the tilt foot allows the position and slant of the projection image to be adjusted.

Press the left-right tilt adjustment lever and raise the front of the projector. Release the lever when the desired height has been reached. Rotating the lowest portion of the tilt foot permits fine adjustments to be made. The tilt foot are lengthened by rotated to the left and shortened by rotated to the right.

UpDown

•Do not lengthen the tilt foot on only one side which would place the projector on an extreme slant. Doing so could result in the projector slipping or falling over and could cause an accident or breakdown.

•When moving the projector, be sure to return the tilt foot to the original position.

CAUTION

• The air intake vents on the side of the projector draw in cooling air with a strong air current. When cloth

or paper adheres to and covers the air intake vents, the internal temperature rises and could cause an

 

 

accident or breakdown.

•Depending upon the material of the placement location, the rubber feet may soil on the placement surface.

E-22