. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1
Compaq Keyboard/Monitor/Mouse Switch Box User Guide
Writer: Kristi Wishon Project: Installation Comments:
File Name:E-ch02.doc Last Saved On:9/6/96 3:18 PM

Chapter 2

Installation
This chapter provides installation information for the Compaq
Keyboard/Monitor/Mouse Switch Box.
WARNING: To reduce the risk of personal injury or damage
to the equipment be sure that; the leveling feet are extended to
the floor and supporting the full weight of the rack. Each rack
should be level and stable. Racks that are not coupled to
g
ether
require the installation of stabilizing feet. This must be
accomplished before performing any work on the rack.
WARNING: Risk of personal injury. The rack may become
unstable if more than one component is extended for any
reason. Always ensure that the rack is adequately stabilized
before extending a component outside the rack. Extend only
one component at a time.

Attaching the Slide Rail

Brackets

The figure below shows how to attach the slide rail brackets to the
Keyboard/Monitor/Mouse Switch Box. Make sure that the front end of the
rack-mount brackets angle out away from the unit.