Offline state, RAID-5 34
one loop with two adapters in each of two using
systems 12
one loop with two adapters in one using system 11
open and close subroutines
adapter device driver 258
open subroutine
tmssa device driver 296
open, read, write, and close subroutines
disk device driver 272
operation after a loss of member disks, split-site
management 194
adapter not known to remaining half of the
array 203
one half of the array is not present 195
split and join procedure not performed correctly 205
options of the RAID Command Line Interface 238
P
part numbers 340
paths, data (SSAlink) 7
examples
broken loop (cable removed) 403
broken loop (disk drive removed) 406
normal loops 401
PCI adapter ODM attributes 257
pdisks and hdisks
changing numbers 326
explanation of 19
identification 19
reformatting a pdisk as an hdisk 387
physical disk change attributes, RAID-5 249
physical relationship of disk drives and adapters 24
one pair of adapter connectors in the loop 24
pairs of adapter connectors in the loop, mainly
shared data 26
pairs of adapter connectors in the loop, some shared
data 25
port addresses
Advanced SerialRAIDAdapter (type 4–P) 6
POSTs(power-on self-tests)
adapter 317
powering off using systems in a large configuration 17
powering on using systems in a large configuration 17
Prepare a Copy option 175
problem determination
for SSA links 400
POSTs,adapter (power-on self-tests) 317
procedures 411
SRNs (service request numbers) 411
SSAlink error 478
problems, RAID array 89
R
RAID array configurator
adding a disk drive to an SSARAID array 140
adding a new hot spare pool 83
adding an SSARAID array 60
adding disks to a hot spare pool 86
canceling all SSAdisk drive identifications 129
changing member disks in an SSARAID array 137
changing or showing the attributes of an SSARAID
array 135
changing or showing the status of a hot spare
pool 74
changing or showing the use of an SSAdisk
drive 144
changing the use of multiple SSAphysical
disks 147
creating a hot spare disk drive 72
deleting an old RAID array recorded in an SSARAID
manager 133
deleting an SSARAID array 70
getting access to the SMIT menu 59
identifying and correcting or removing failed disk
drives 91
identifying array candidate disk drives 125
identifying hot spare disk drives 121
identifying rejected array disk drives 123
identifying system disk drives 127
identifying the disk drives in an SSARAID array 119
installing a replacement disk drive 95
installing and configuring SSARAID arrays 58
listing all defined SSARAID arrays 100
listing all SSARAID arrays that are connected to a
RAID manager 102
listing all supported SSARAID arrays 101
listing array candidate disk drives 115
listing hot spare disk drives 111
listing old RAID arrays recorded in an SSARAID
manager 131
listing rejected array disk drives 113
listing system disk drives 117
listing the disk drives in an SSARAID array 109
listing the disks that are in a hot spare pool 80
listing the status of all defined SSARAID
arrays 104
removing a disk drive from an SSARAID array 138
removing disks from a hot spare pool 86
showing the disks that are protected by hot
spares 77
swapping members of an SSARAID array 142
RAID array problems 89
RAIDArray SMIT menu, getting access 59
RAID arrays
adding a disk drive to an SSARAID array 140
adding a new hot spare pool 83
adding disks to a hot spare pool 86
502 User’s Guide and Maintenance Information