Chapter 7 Advanced Configuration for Compex SGX3226

7.7MirrorPort Config

7.7.1Using Mirror Port to monitor Traffic

This function allows you to set up a ‘mirror’ port of any specified port/s, such that you can monitor the traffics of the monitored port/s or VLAN without intervening them. In effect, the traffics on the monitored port/s are replicated on the mirror port that you can use a protocol analyzer to analyze the traffic for specific problem.

1.Go to MirrorPort Config from the Command window.

2.Select one Mirror Port.

3.Click on the dashed line ‘–’ on that particular port if you want to select it as a Mirrored Member (T).

4.Hit on Apply button after you are satisfied with the setup. Click Save button to update the latest configuration.

54