Chapter 8 Using SYSTEM TOOLS Menu
8.3System Configuration
This is an easy access in configuring the system. You can configure IP address, Subnet Mask or Default Gateway of the management board in Compex SGX3226. It is likely that several VLANs are on the single switch, and each VLAN can be regarded as an independent network, so their network addresses may be different.
System Name
You can obtain this information from your ISP.
System Contact and Location
You may leave it as it is or fill in your ISP contact and location information. They are for your future reference only.
1.Go to System Configuration from the Command window.
2.Give a description for the System Name and System Location of Compex SGX3226.
3.Key in the System Contact information and describe the Product Name of the switch.
4.Enter your new IP address and Subnet Mask.
5.Click Apply button and save the setting.
Your system will prompt you to reboot your switch. Click on Yes button to take effect on the changes.
Please note that you need to use your new IP address to login to the main page of Compex SGX3226.
61