INSTALLATION INSTRUCTIONS

UNPACKING INSTRUCTIONS

1.With the unit upright, carefully remove the shipping crate. Inspect for shipping damage and report any such damage to the shipper immediately.

2.Open the hinged service door and remove shipping tape from the ice drop cover, storage hopper cover and agitator in the storage hopper.

3.Remove shipping tape from air inlet filter and sink grill.

INSTALLATION

NOTE: An Everpure Model 9320-42 Systems IV, Model B1000 (or equal) ice maker quality water treatment unit MUST BE INSTALLED in the water supply line to the ice maker. Failure to do so may result in poor quality ice, low production output, and may cause premature failure of the ice maker evaporator and void the extended evaporator warranty.

This ice maker is provided with a stainless steel evaporator designed to last the life of the product. But, some of the chemicals in treated and untreated water, specifically chlorine and sulphur (sulphide), have the ability to at- tach stainless steel and cause premature failure. An initial investment in proper water treatment will pay for itself in increased production, quality and long life of the product.

1.Location

Locate the ice maker/dispenser indoors in a well-ventilated area. Avoid exposure to direct sunlight and/or heat caused by radiation.

Ambient room temperature must be in the range of 60° to 90° F. Do not install unit in an enclosed area where heat build up could be a problem. For proper air flow for the refrigeration system, allow a 6?clear- ance at the back of the unit and a 12?clearance at the right side panel.

Consult Figure 1 for utility connection location.

Consult Figure 2 for dimensions for mounting unit to the counter with the hardware provide. Note that the unit must be level for proper operation.

The unit must be sealed to the counter. The mounting template drawing (Figure 2) indicated the openings which must be cut in the counter. Locate the desired position for the unit, then mark the outline dimensions and cut-out locations using the template drawing. Cut openings in counter.

Apply a continuous bead of NSF International (NSF) listed silastic sealant (Dow 732 or equal) approximate- ly 1/4?inside of the unit outline dimensions and around all openings. Then position the unit on the counter within the outline dimensions. All excess sealant must be wiped away.

2.Plumbing

Connect the ice maker to a cold, potable water source suitable for drinking. Do not install unit on a water softener line. It is recommended that a hand shut-off valve, strainer, and backflow preventer be used on the incoming supply line. For Models: SID851/250S and SID851/250S-B, a 3/8?outside diameter compression tube fitting is provided at the back of the unit for the water supply hook up (See Figure 1). For model SID851/250S-BC, a 3/8?beverage tubing with a 3/8 x 1/4 barb splicer fitting is provided for connection through the bottom opening in the unit to the water supply (See Figure 2).

90914

2

Page 4 Page 6
Page 5
Image 5
Cornelius SID851W/250S-BC, SID851A/250S-BC manual Installation Instructions, Unpacking Instructions
Page 4 Page 6

SID851W/250S-BC, SID851W/250S-B, SID851W/250S, SID851A/250S-BC, SID851A/250S-B specifications

The Cornelius SID851 series, including models SID851A/250S, SID851A/250S-B, SID851A/250S-BC, SID851W/250S, and SID851W/250S-B, stands at the forefront of beverage dispensing technology. Designed for both efficiency and versatility, these units are ideal for various commercial applications, from restaurants and bars to event catering and convenience stores.

One of the defining features of the SID851 series is its robust construction. These models are built to endure the rigors of high-demand environments, with durable materials that are both corrosion-resistant and easy to clean. This ensures long-term reliability and minimal downtime, crucial factors for businesses that serve high volumes of beverages.

The SID851 models are equipped with advanced cooling technologies, making them proficient in maintaining optimal beverage temperatures. The models utilize a state-of-the-art refrigeration system that ensures quick cooling and consistent temperature control. This feature is essential for preserving beverage quality, particularly for carbonated drinks that require specific serving conditions.

Each unit supports multiple beverage types, providing flexibility in service. The SID851A models, for instance, can easily transition between different drink options, allowing users to switch from sodas to mixed drinks without hassle. This versatility is enhanced by user-friendly interfaces that enable quick selection and adjustments.

Energy efficiency is another hallmark of the SID851 series. Designed with modern energy-saving technologies, these models not only reduce operational costs but also contribute to environmentally sustainable practices, making them ideal for businesses conscious of their ecological footprint.

The SID851W models offer an advanced wireless communication feature, allowing for seamless integration with point-of-sale systems. This smart technology facilitates real-time monitoring of beverage inventory and dispensing metrics, empowering business owners to make informed decisions based on data analytics.

Safety is paramount in the SID851 designs, featuring automated shut-off mechanisms to prevent overflows and spills. Additionally, the ergonomic design of the dispensing interfaces minimizes user strain, promoting a comfortable and safe working environment.

Overall, the Cornelius SID851 series represents a blend of innovation, durability, and efficiency, making them top choices for any beverage service operation. By investing in these models, businesses can enhance their service capabilities while ensuring that customer satisfaction remains a top priority.
Top Page Image Contents