ELEMENTS MEDIA STAND
drawer
glidesupport
bottom panel
9A) Attach 2 drawer glides to bottom panel with 3 small screws per glide. Secure screws with a screwdriver.
B) Attach 4 supports to bottom panel with 1 small screw per support as shown.
bottom panel
10With the assistance of another adult, position unit upside down onto a clean, padded surface as shown. Attach bottom panel to assembled unit with 10 bolts. Secure bolts with an allen wrench.
B
A
bottom
frame
11A) Attach bottom frame to assembled unit with 12 large screws as shown. Secure screws with a screwdriver.
B) Gently tap 6 feet into bottom of assembled unit with a hammer as shown.
A | left and right |
|
| drawer sides | B backdrawer |
|
|
drawer |
|
back | D |
|
C
12A) Insert 2 small cam screws into left and right drawer sides as shown.
B) Insert 4 small cams into drawer back as shown.
C) Insert 2 small wood dowels into drawer back as shown. D) Fit cam screws of left and right drawer side into corresponding holes of drawer back as shown. Secure 4 cams.
Made in China - r08 | Customer Service 800.967.6696 www.crateandbarrel.com | Page 4 of 6 |