MATRIX REVOLVING FLOOR MIRROR
Thank you for purchasing the Matrix Revolving Floor Mirror. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
2 - screws | 1 - back | 1 - revolving |
| pin | pin |
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench (included)
COMPONENTS
1 - mirror
1 - stand
AB
revolving pin
stand | mirror |
screws
stand
1A) Insert 2 screws into stand using an allen wrench. Secure screws through stand and into holes of revolving pin as shown.
B) Insert revolving pin of stand into corresponding hole of mirror as shown.
2Insert 1 back pin into back of assembled unit as shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Made in Taiwan - r03 | Customer Service 800.967.6696 www.crateandbarrel.com | Page 1 of 1 |