PASSAGES MEDIA STORAGE CONSOLE
leg
5With the assistance of another adult, carefully fit dowels of assembled unit into corresponding holes of front frame as shown. Secure with 12 small bolts, 12 spring washers, and 12 flat washers as shown, using a screwdriver.
6Fit dowels of each leg into corresponding holes of assembled unit as shown. Secure with 1 large bolt, 1 spring washer, and 1 flat washer as shown, using a screwdriver.
back panel
8Attach back panel onto assembled unit with 20 small screws as shown. Secure screws with a screwdriver.
C
A
pull
C |
| A |
B |
| |
|
| |
| adjustable | shelf |
| shelves | |
|
| pin |
9 A) Insert 8 shelf pins at desired shelf heights as shown.
B)Place 2 adjustable shelves into assembled unit. Make sure each shelf is securely supported by shelf pins.
C)Attach 2 pulls to doors of assembled unit with 2 pull screws per pull as shown. Secure screws with a screwdriver. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
Made in China - r08 | Customer Service 800.967.6696 www.crateandbarrel.com | Page 3 of 3 |