SPRINGDALE TALL CABINET
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer.
9Place unit in its final location. If the floor is uneven or the door doesn't appear square in the case frame, adjust levellers on the underside of the legs up or down to compensate.
Assembly is now complete.
WALL MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use appropriate toggle or molly bolts for your wall type. Mount to wood studs whenever possible.
A) Attach bracket to top center of cabinet with wood screw, using Phillips head screwdriver to tighten.
B) Mark location on wall approximately 2" below the bracket mounted to the back of cabinet.
C) Drill a pilot hole into the wall stud. If no wall stud is available, drill a hole into the wall that is slightly smaller in diameter than the anchor. Gently tap anchor until flange is flush with the wall.
D) Attach other bracket by inserting large screw through bracket and into anchor on the wall.
E) Place unit so the bracket on the back edge is in line with the bracket on the wall.
F) Lace one end of the wall strap through one bracket then the other, bringing both ends together.
G) Ensure that the strap is secure.
Made in China R04 | Page 4 of 4 |
Customer Service