WELLS BED

 

1 A) Insert 4 wood dowels into headboard and

headboard

footboard as shown.

B) With assistance of another adult, fit dowels of

 

 

headboard into corresponding holes of left and right side

 

rails as shown. Attach each side rail to headboard with 2

 

bolts, 2 spring washers and 2 flat washers as shown.

 

Secure, but do not over tighten, bolts with an allen

 

wrench.

 

Repeat steps for footboard.

A

right side rail

left side

B

rail

 

footboard

NOTE: Do not over tighten the bolts

B

B

A

2A) Insert 2 support legs into center support rail. as shown. Turn each leg counter-clockwise to secure.

B) Fit center support rail into brackets of headboard and footboard as shown. Push down firmly until rail securely engages each bracket.

NOTE: Make sure straps of slat assembly are facing up as shown

NOTE: Do not over tighten the screws

3With assistance of another adult, carefully align slat assembly with pre-installed blocks on each side rail. Attach slat assembly to each side rail with 2 screws. Secure, but do not over tighten, screws with a phillips head screwdriver. Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.

Made in Vietnam - r03

Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com

Page 2 of 2