WINDHAM WALL ORGANIZER
Thank you for purchasing the Windham Hallway Organizer. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
HARDWARE
4 - screws 4 - plastic anchors
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
phillips head screwdriver
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Wall bracket |
| INSTALLATION INSTRUCTIONS |
with pointed |
|
|
side up |
| The wall mounting hardware included with this shelf is |
|
| |
|
| intended for drywall installation only. Be sure to use |
|
| hardware appropriate for your wall type. Whenever possible, |
|
| fasten screws directly into a wall stud. If you are unsure about |
|
| your wall type or what mounting method you should use, |
|
| consult a qualified professional or your local hardware store. |
|
| 1. Determine the wall location and place the wall bracket into |
|
| position. Make sure the pointed side of the bracket points up. |
|
| There are 8 holes in the bracket. Choose 4 of these holes for |
|
| anchoring into the wall, aligning at least 1 hole with a wall stud if |
|
| possible. Level and mark the 4 hole locations on the wall. |
|
| 2. If attaching directly into wall studs, skip to Step 4. |
|
| 3. For drywall installation, insert 1 plastic anchor at each |
|
| marked hole location, tightening with a phillips head |
|
| screwdriver until the head of each anchor is flush to the wall |
|
| surface. |
wall |
| 4. Insert 1 screw through each hole in the wall bracket and |
| into the corresponding anchors or studs in the wall. Fully tighten | |
bracket |
| |
| each screw with a phillips head screwdriver but do not over | |
|
| |
|
| tighten. |
|
| 5. With the assistance of another adult, fit the angled bracket on |
| organizer | the back of the the unit onto the wall bracket. Make sure the unit |
| is firmly seated in the wall bracket. | |
WALL |
| |
| Installation is now complete. |
Made in China - r04 | Customer Service 800.967.6696 www.crateandbarrel.com | Page 1 of 1 |