Crestron electronic IM-RXV1-M, IM-RXV3-M

Crestron IM-RXV1-M & IM-RXV3-M iMedia Receiver with Video & Mic Input

Connectors, Controls & Indicators (Continued)

# CONNECTORS1, CONTROLS

& INDICATORS

DESCRIPTION

5 PWR LED (Green) indicates power connected to 18 VDC connector.

6 RESET BUTTON SW-R - (1) Recessed pushbutton for software reset.

7 RELAY OUTPUT (1 – 2),

INPUT (1 – 3), IR, G

12 23 G

(1) 9-pin 3.5mm detachable terminal block comprising:

(2) normally open, isolated relays;

(3) digital input ports referenced to ground;

(1) IR output port;

Relay rating: 2 Amp, 50 Volts AC/DC, MOV arc suppression;

Digital input rating: 0-24 Volts DC;

Digital input impedance: 2k ohms pulled up to 5 Volts DC;

Digital input logic threshold: 2.5 Volts DC nominal;

IR output frequency: Up to 1.2 MHz.

NOTE: IRP2 IR emitter probe sold separately.

8 INPUT LED (Red) indicates activity on any input port.

9 IR LED (Red) indicates activity on IR port.

10 MIC

(1) 3.5mm TRS mini-phone jack;

Balanced mono line level audio input;

Maximum input level: 2 Vrms balanced, 1 Vrms unbalanced;

Input impedance: 18k ohms balanced/unbalanced.

Tip

Ring

Sleeve

Tip: Positive

Ring: Negative

Sleeve: Ground

11 COMPUTER

(1) 6-pin RJ-11 female; computer console port. Use with

STCP-502PC serial cable (not included).

PIN # DESCRIPTION

1 CTS

2 GND

3 RXD

4 TXD

5 RTS

6 N/C (Not connected)

In the event that modular cables or an RJ-11 to DB9F adapter is not

available, the following diagram provides information so that the cable can

be fabricated on site. (Alternatively, Crestron cable number STCP-502PC

is sold separately.)

1CTS

GND

RXD

TXD

RTS

n/c

TO PC

COM PORT

TO RS-232

PORT

Part #

748047-1

Part #

641337

Part #

AWC10152-A

(Continued on following page)

Operations & Installation Guide – DOC. 6593A iMedia Receiver: IM-RXV1-M & IM-RXV3-M • 9