Crestron SMK-6X Swivel Mount Kit for TPS-6X
SMK-6X/TPS-6X-DS Assembly
1. Feed the Connector/Boot and the full length of the cable through the swivel
mechanism tube with the cable positioned between one of the guide pins
and the rearmost screw hole as shown in the illustration below.
2. Attach and secure the swivel mechanism plate to the TPS-6X-DS using the
provided screws.
3. Pull the remaining cable slack down through the swivel mechanism tube.
CAUTION: Ensure that the cable is not pinched at any point between the swivel
mechanism plate and the base of the TPS-6X-DS.
SMK-6X/TPS-6X-DS Assembly Diagram
Cable
Swivel Mechanism
Tube
Connector/Boot
Swivel
Mechanism Plate
Guide Pins
Screws (3) #08-32
(2007269)
TPS-6X-DS
Installation Guide – DOC. 6577A Swivel Mount Kit for TPS-6X: SMK-6X • 5