Using your iPod
5
1Insert the correct dock adapter (not included)
that fits your iPod. Your iPod should fit snuggle
into the correct adapter. Gently press the adapter
until it snaps firmly in place.
2Connect one end of the supplied 3.5mm stereo
cable to the auxiliary output jack (2). Connect
the other end of the cable to an auxiliary input
on your stereo.
3Connect your iPod as shown in the illustration
below.
4Browse your iPod for songs and press the
Play/Pause button. Your music should begin to
play.
5Adjust the volume to your desired listening level.
6To remove the dock adapter, push your fingernail
into the slot in the back of the adapter and lift
up.
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Specification
Power Supply : AC Adaptor DC7.5V 700mA
Power Consumption : 5W
WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
*DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Troubleshooting
There is no Power
1Make sure the power adaptor is connected to
the iCompanion and to a power outlet.
Basic Operation
Power Source
1Unwind the power adaptor. First connect the
small end of the adaptor to AC Adaptor Jack(3),
then the other end to an AC power outlet.