SPECIFICATIONS

 

 

 

 

 

ENGINE*

 

 

 

Engine Type.................................................................................................................................................................

Air-Cooled, 4-Cycle

Displacement................................................................................................................................................................

1.6 cu. in. (26.2 cc)

Clutch Type ................................................................................................................................................................................

Centrifugal

Operating RPM...............................................................................................................................................................

6,800 - 9,300 rpm

Idle Speed RPM .............................................................................................................................................................

3,400 - 4,400 rpm

Ignition Type.................................................................................................................................................................................

Electronic

Ignition Switch .......................................................................................................................................................................

Rocker Switch

Valve clearance.....................................................................................................................................

0.003–0.006 in. (0.076–0.152 mm)

Spark Plug Gap .......................................................................................................................................................

0.025 inch (0.635 mm)

Lubrication ..................................................................................................................................................................................

SAE 30 Oil

Crankcase Oil Capacity .......................................................................................................................................................

3.04 oz (90 ml)

Fuel ..............................................................................................................................................................................................

Unleaded

Carburetor..............................................................................................................................................................

Diaphragm, All-Position

Starter......................................................................................................................................................................................

Auto Rewind

Muffler ............................................................................................................................................................................

Baffled with Guard

Throttle......................................................................................................................................................................

Manual Spring Return

Fuel Tank Capacity...............................................................................................................................................................

18 oz (532 ml)

 

 

DRIVE SHAFT AND CUTTING ATTACHMENT*

 

 

 

Drive Shaft Housing ............................................................................................................................................

Steel Tube (Rapid-Link™)

Throttle Control ...............................................................................................................................................................

Finger-Tip Trigger

Approximate Unit Weight (No fuel, with handle, shield and cutting attachment)...................................................................

12 lbs (5.4 kg)

Cutting Mechanism ...............................................................................................................................................................

Bump Head™

Line Spool....................................................................................................................................................................

Bump Line Releaser

Line Spool Diameter: ....................................................................................................................................................

3 inches (76.2 mm)

Trimming Line Diameter: .......................................................................................................................................

0.080 inches (2.03 mm)

Cutting Path Diameter ..............................................................................................................................................

17 inches (431.8 mm)

*All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.

16